I got to thinking about how I could make a thinner MMDVM based multi-mode hotspot with a Nextion display.
I decided to try mounting the boards next to each other instead of plugging the MMDVM board into the Pi ZeroW board.
I also wanted the case to have rounded corners. Here is what I came up with.
Unfortunately, it did not turn out to be much thinner at all. I was able to center the display in the front of the case though.
I also designed a desk and wall mount bracket for it. I left room inside the case for a battery option in the future.
To make the unit more portable, I added a battery charger/boost regulator, battery, and power switch.
Leave a Reply